I cant get my crappy dwl-g120 usb carb to work in gentoo with either the prism54 driver or ndiswrapper Im a moron
what to do?
KWhat4, now patching failed
— Couldn’t find ‘kde-base/kdebase’ to unmerge. cla
how are you applying the patch cause i dont see it in that ebuild
KWhat4, i unmerged all the packages…but it still says they are blocking
?kde split ebuilds
pasteagain
kk
in the ebuild line 25
what is the easiest way to install grub to the MBR after the fact?
cla is probably correct
^
thank goodness gentoo-portage.com is still up
I_R_Baboon:are you there
?
read http://www.gentoo.org/doc/en/kde-split-ebuilds.xml howto
a disk on my raid1 array just failed, and i don’t want to manually bring up my raid5 array for this
ok i need to see soem out put for the failure
adn then decide, because i won’t be responsible for packages you *will have to* unmerge
maybe try it with: include/sip/sippdu.h.orig
OK
KWhat4, http://pastebin.ca/651708
emerge more-ram
you upgrading kde?
im doing a emerge -uDa
KWhat4, the patch now applies fine
KWhat4, and I get a different error right now
ok does it compile or crash again
it’s all about the same class
crash again
yah that class is definitly borked
shit
now allI need is to convince gnome not to depend on ekiga
can I just abandon ekiga?
you using kde-meta or mono
KWhat4, im not sure
you could modify the ebuild that requires it
I can’t get my crappy dwl-g120 usb carb to work in gentoo, with either the prism54 driver or ndiswrapper. I’m a moron, but I just need a little nudge to get me further, cause I’m stuck. I’ve inserted modules, but nothing is detected. anyone able to gimme a lil’ hand?
http://gentoo-wiki.com/HOWTO_Update_KDE_3.3_to_KDE_3.4
i would go with the meta
scratch that i would go with the non mono
what do you mean? im already using 3.5…
when you insert the modules, do you get error messages in dmesg? do you see the card with iwconfig? how about with ifconfig -a ?
no error messages, and nothing in iwconfig
your kde is borked, i would try to rebuild
that’s what got me stumped, nothing to work with
Ok, so I’ve now tried ntp-4.2.4_p0 and ntp-4.2.4_p3 and they both fail.
nothing about needing firmware or anything, right?
Is there someone who could help me?
fail? fail how?
yeah….so like? emerge -e kde-meta ?
i just built ntp, went fine
net-misc/ntp-4.2.4_p3 failed.
nada, and I’ve got the firmware ready, but I ain’t getting that far
like 10 minutes ago
it depends what you want
i like a minimal kde so i follow the Installing a minimal KDE 3.4/3.5
i don’t even know, lol…should have stayed with gnome
KWhat4, can I just tell portage not to install Ekiga?
teach JakiChan errors
can I mask Ekiga?
No such faq, did you mean one of ‘exclude errors’, ‘grub errors’?
teach JakiChan error
To inform us about a problem, you need to give us the /fault/, not the error. Error lines that begin with “!!!” or “make” are of no use to us. Fault lines, like “foobar.o: no such file or directory” or “undefined variable cabli” are. If it is over a few lines, please use a pastebin such as
http://rafb.net/paste/ (details: gentoo-detailed/error)
no because its a hard depend on gnome, i dont know enough about why gnome needs it,
ACCEPT_KEYWORDS=”~amd64″ emerge =dev-libs/cyrus-sasl-2.1.22 |||||| dev-libs/cyrus-sasl-2.1.22 (masked by: missing keyword)
it’s not needed it’s just a part of a virtual package
you unmask this version of gnome ?
http://rafb.net/p/XnVmf141.html
teach ssorg env abuse use
environment abuse USE: Please don’t use “USE=’use flag’ emerge foo” syntax to emerge packages for real. Portage will forget your settings and mayhem will ensue. Instead, use make.conf to store global useflags, and /etc/portage/package.use for package-specific useflags. If you just want to test
the effect of a USEflag, use emerge with the –pretend flag.
It is not obivous where it fails.
Skunky#/ i tried the correct way
you can try adding it to package.mask but you may need to remove it from the depends of the ebuilds that fail
http://rafb.net/p/XnVmf141.html
this is starting to get very dirty and your probably going to have “unexpected” results
KWhat4, you’re right
this is beginning to be VERY direty
it would help if you were trying to emerge something that’s not masked… like 2.1.22-r2
Skunky#/ i pasted it earlier
-r2 fails
KWhat4, I think i’ll roll back everything
are u there?
you running a masked version of gnome or the green version ?
can MRTG give me a multi device overlay on a single graph…that is, i have a bridge with a bunch of different interfaces and i want to know the bandwidth for them all as well as the overall output/intput rate
the only thing 2.1.22 is flagged for is mips
Skunky#/ i believe i found out why -r2 died
had gentoo-ppc on a mac laptop but the video apps were a mem-monster, gah, back to osx
the green
Failed to generate sasldb2
KWhat4, hold on hold on
Skunky#/ 15487 Segmentation fault | “${ROOT}/usr/sbin/saslpasswd2″ -f “${ROOT}/etc/sasl2/sasldb2″ -p login
well. that’s pretty.
aggreed
how to fix it though
Generating a 10240 bit RSA private key
- might that be it
thats a large rsa key
my irc network runs on that
so does my https
10240 or 1024
hey got a quick question, a game im trying to run through wine is complaining about not enough swap space (requires 2gb) yet I only dedicated 256mb… is there any way to bypass this?
9 CEST 2007 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ AuthenticAMD
KWhat4, I am not using a masked gnome
Any advice on figuring out why the package won’t install?
KWhat4, nothing about gnome in my keywords, masked, etc…
im out of ideas at this point… its hard to debug this stuff when you dont use it … ever
nope. other than try using openntp instead.
if the game requires 2GB you need to give it 2gb
KWhat4, I really appreciate it
thanks
will fly home
bbye
byte
is there any way to make it use the space on a different partition? (like say, the main one?)
It’s stuff like this that makes me hate linux in general and gentoo in particlar. Nothing works nearly as well as FreeBSD ports.
Failed to generate sasldb2
fixed
nope.
what do you mean?
um. so. go run bsd then.
Skunky#/ know anybody that does
If I could I would. But our local penguinista has “standardized” on gentoo.
hit up the guys on #gentoo-amd64, and check the forums…
i looked in forums
and bugs
nothing
migth also try doing a revdep-rebuild and making sure you don’t have something else borked
well, is there a way to ‘enlarge’ the swap partition? in windows the ‘virtual memory’ is located on the main partition (unless changed) so is there a way to force wine to use /dev/sda1 (the partition where gentoo is installed) instead of /dev/sda2 (where the swap is located)
revdep-rebuild ?
acx#/ google for “make swap space larger linux”
its fairly eASY
Skunky#/ more details on revdep-rebuild please
um. revdep-rebuild -h
i dont have revdep-rebuild
is that a package
acx afaik you can’t make wine use ” it’s own” swap – you can however make a swapfile and mount it as a swap partition
install gentoolkit
thx
search for swapfile on google.
oh no jakichan told us. *yawn*
man mkswap
acw there is also a nice article in the gentoo.org/doc section
search for swapiness or something
or thrashing?
Skunky#/ found the bug … pax saslpasswd2: stack smashing attack in function __dbh_err()
well. then. that’s not the ebuild’s fault.
thanks
Skunky#/ hardened rocks wish there was more progress on it though
I have finished installing xorg, and have also installed xfce4 How do i set my computer so when I boot each time I can pick what window manager I want? and login with username/password
I dont want to boot directly to console.
per any manual, xdm
you need to configure xdm (or gdm, kdm, wdm…)
hello,
athlon, get a graphical login
Im installing GDM right now.
what’s the difference between
is that what i want?
~sys-devel/binutils-2.17.50.0.18 ** and
sys-devel/binutils-2.17.50.0.18 **
in file package.keyword
there is no diff as far as i can see
~ will also emerge the -r1 -r2 -r3 revisions
oh
nice, didnt know that
I_R_Baboon:are you there?
thechris, but without ~, this entry doesn’t work
package.keywords or package.keyword?
package.keywords
sorry for the missing ’s’
is there anyone that can help? iam installing gentoo now. but each time after i set root passw he gives installation failed…
all of my taskbar icons are not in my task bar, they are on my desktop like icons, and I cant get them back into the taskbar.. i tried logging out and back in, but that didnt fix the prob… and ideas?
most likelt there is no package for the second one, but there is a package with a -r1 or such which will match the first one
Skunky#/ who would know more about sasldblistusers2
it seems thats messing u
thechris, not quite understand, so you are saying there is not -r1 for binutils-2.17.50.0.18 ?
thanks that did the trick
is there an oracle ebuild?
express edition of course
all i can find are java db utils
Permission denied: access(‘/’, W_OK)…how can I get around this?
np
perhaps dev-db/oracle-instantclient-basic
but is the ‘client’ the server?
MooingLemur ^^
don’t think that works in an ebuild
what doesn’t work in an ebuild?
the oracle db
there is in the sabayon overlay
or I could be wrong 
just seems like there’s too much custom crap to do with oracle
in the installer is there a fast way to install only the neccesary use flags automatically?
that an ebuild won’t give you much advantage
Permission denied: access(‘/’, W_OK)…how can I get around this?
USE flags are for _optional_ things, so no
you have to pick and choose which you want, or use a prepared profile, or both
is there an IE ebuild?
/notice _zofbot3 ies4linux
reisio,k ty
with the exception of ‘gnome’, ‘kde’, ‘arts’, ‘esd’, ‘eds’, ‘qt’, ‘qt3′, ‘qt4′, you’ll probably want the vast majority of the USE flag defaults the desktop profile provides (assuming you want a desktop at all)
bwith the exception of ‘gnome’, ‘kde’, ‘arts’, ‘esd’, ‘eds’, ‘qt’, ‘qt3′, ‘qt4′, you’ll probably want the vast majority of the USE flag defaults the desktop profile provides (assuming you want a desktop at all)/b
backups ;p use em in the future
#ceara
reisio, iam new as u can hear .D
/var/log/emerge.log
regenworld
can’t hate it that much, then
how do you accidentally delete world?
and how many times have you done this?
Permission denied: access(‘/’, W_OK)… how can I get around this?
invalid option — 4). I’m using a stage-3 tarball that checksummed; gcc 4.1.1, binutils 2.16.1, i686 livecd + stage 3 + make.conf chost. what could be going wrong?
regenworld adds alot of deps you haven’t emerged
a_lot
hehe
did you improperly set MAKEOPTS in make.conf?
rm -fr /var/lib/portage/world is a lot like mplayer ~/porn/*
can anyone pls help me with this prob; i get this right after i select my country ; http://pastebin.com/d292fb1d4
haha, yeah. -4 instead of -j4. damn I can’t believe I didn’t think of that?
*.
is there something like top to list disk access per process … like ohshitmydiskisthrashing what’s doing that?
thank you very much
i spend most of my time making fun of people in here, i try to help from time to time
hi! anybody who knows details about unreachable online packages database http://packages.gentoo.org/ ?
yeah, it’s unreachable
ugh
emerge -n eix && update-eix && eix –help
Permission denied: access(‘/’, W_OK)… how can I get around this?
Where are you ?
do you have any idea why emerge can complain on something like this?: ROOT=/foo/bar emerge something
tells me it cant access /
does it matter, you don’t need to do that, do you?
I do need to do it
reading the docs re java/flash/firefox on amd64 … bit confused, what is the best way to go?
Is there any bash command to set off a system beep?
java works fine, get nspluginwrapper for flash on amd64 firefox
oh, and get netscape-flash too of course
do you know why it isn’t reachable and for how long?
k, ta, iamben too
wiki freenot howto amd64
http://gentoo-wiki.com/HOWTO_AMD_64
no, no
if I didn’t need to do it I wouldnt have done it ( I can mount my real root as read only atm, and I want to emerge it to a mounted dir)
cheers, reading that …
tell us what you’re trying to do, maybe we can help… im pretty sure ROOT=/foo/bar emerge is not the way to do it
you dont even know what Im trying to do and youre pretty sure that how Im trying to do it is not the way? odd… I’m trying to emerge a certain package into a dir other then /
pls anyone know what this is about? i try to install gentoo . this occurs right after i chosen my country . http://pastebin.com/d292fb1d4
bug 158882 ?
https://bugs.gentoo.org/158882 enh, P2, All, vapier@gentoo.org-gli-bugs@gentoo.org, NEW, pending, installer should populate TIMEZONE in /etc/conf.d/clock
any ideas then?
reisio, it was to me ? about the bug?
I ran into a problem with my fs, now everytime it env-updates ldconfig says some files are empty
i apologize, you aren’t as far off as i expected
Permission denied: access(‘/’, W_OK)… how can I get around this?
am I off though?
how do I reemerge everything on my box including all libs?
emerge -e world
yupish
emptytree
why?
reisio, ok
it will likely take at least a week if youre on a desktop
you have /var/tmp/portage somewhere writable, correct?
yes
yes… I especially mounted it as tmpfs so that itll be writable (mounted /var/tmp actually)
hold on, Ill paste the entire log
well now since my fs messed up a bit I have problems, even chrooting into the fs, rc doesnt see the init level etc
reisio, how come i have them ? no one ever had them before?
dunno, the installer has never exactly been stable :p
reisio, hehe.p
hello, how to install a tbz2 file? i try emerge -1 –nodeps -K xxx.tbz2
and emerge tells me that You need to adjust PKGDIR to emerge this package.
i set it in /etc/make.conf, but it doesn’t work
did I miss something?
put the tbz2 into PKGDIR, then emerge -K packagename
it is in the PKGDIR
looks like I cant… anyway, can we continue w/o log?
well , the situaion might be a bit tricky. I built a amd64 binutils on my x86 machine, and want to install it on another machine
hah we can try… do you know how to step through the emerge process one stage at a time w/ the ‘ebuild’ command?
no… but I know where it fails – when it tries to install the files (last stage I think)
how do I redirect error to normal output?
but the tbz2 was created using emerge -B right?
iamben, yes, it is.
output.txt” will send stderr and stdout both to output.txt
try “emerge -1 –nodeps -K =binutils-x.y.z”
http://rafb.net/p/TIzHSP23.html
ok, but usually people have something like &12 (except that doesnt work for me rght now so its prolly wrong)… what is the correct way?
besides what you gave that is
i tried. it doesn’t work.. it saids no ebuilds to satisfy
is faster
you have to have an ebuild matching the version of the packaged binary
iamben, ok.
i will have a try
iamben, i talked with u about the bug just a minute ago? or was it someone else?
not i
aah, so I put the & in the wrong place… cool. I like the new way better too, but just wanted to be reminded of the old
iamben, k got question, what if i dwnload another arch eg 86x , normally i wont have the same bug aint it?
I_R_Baboon:where are you?
looking for you man!
does someone use kde overlay ?
try #gentoo-kde
you seriously think i can understand that?
lol
iamben, hehe i translate .p [ if i download another architecture like now i got 64 bit i download 86 version so same distro only other architecture..
Which program can I use to extract the source files from an RPM?
what for?
iamben, would i have to same problem there
alien
I have a source rpm and I need the files so that I can build the package.
app-arch/rpm, or app-arch/rpm2targz
but you can use the rpm
your question is way too general
its an issue w/ the installer right? if so, do a manual install and all will be well
ill try ty
saw the link?
bah, what filesystem type should i put for a dvdburner in fstab?
reading, pondering
auto
np, just making sure it wasnt lost
auto.. ok.. weirdness, somehow mine got changed to "audo"
some stageballs are erroneous in that respect
I've seen this come up before.
well mine would have been i486 stage3 as of about 1 week ago
is there a way to make one app use a specific gtk theme without knobbling the rest
anyone have mythstreamtv running? if so i'd love some help
what app?
still a few people in #gentoo-mythtv
i'm looking for docs on making a gentoo bootable usb key
good afternoon. any nxserver experts bored enuf to give me a hand? I've an issue i've not ran into yet
wiki ENIAC2 liveusb
http://gentoo-wiki.com/HOWTO_Gentoo_LiveCD_and_LiveUSB
well I may not bother now Iwas using xfce's panel and that uses the gtk+ style
i was compiling the kernel in the morning, suddenly there came a warning
...so?
but the panel has got some glitches on multihead display
it's the errors you have to worry about
im being distracted, my isp's DNS seems to have died and its complicating things
unknown host"
where is the configuration file lost?
iamben:
i run gentoo
duh found it with google
lxpanel or fbpanel which should I install now
want the dns server from opendns.org?
woo hoo im in xwindows
finally
.com that is (same thing)
grats athlon! i just got here a few days ago myself and its great!
I need some help getting my sound card to work my soundcard is integrated sis, I enabled the only thing i saw for sis and recompiled my kernel but am having no luck can someone help
i got some servers from guys in another chan, thanks... don't you have somewhere besides floppy you can temporarily write for the install?
athlon:
Well I got interupted by my old girlfriend talking about what we should of and could.So I need dhcpd working it just won't start.
which soundcard do you have?
anyone have viewvc working? I thought it was supposed to get installed with webapp-config but it says that it's not compatible.
wots the best hosting logging daemon to use for a developer setup?
tr3, I belive it is sis,, how do i find out
lspci
floppy is just where I mounted it cause it was an unused dir... in reality it is tmpfs
ah ok
and 6 inside it is a writable partition
it's an AC97 chispet?
2.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC’97 Sound Controller (rev
yes
what’s happening?
Intel/SiS/nVidia/AMD/ALi AC97 Controller
is the channel under attack?
this kernel module
i think i have that enabled, let me check
Intel/SiS/nVidia/AMD/ALi AC97 Controller
ok so,
alsamixer and check if the volumes are ok
by default they are at 0
lxpanel is not in portage
lxpanel?
Intel/SiS/nVidia/AMD/ALi AC97 Controller ? ?
Intel/SiS/nVidia/AMD MC97 Modem
lol
it’s ok
you really need the modem module?
lol
guess not
btw, now check
with
alsamixer
if the volumes are up
wheres that at
I am going to try kooldock
open a terminal
and write
alsamixer
lol
Mike linux based hosting services # alsamixer
alsamixer: command not found
Mike linux #
hm
which package was?
emerge alsa-utils
alsa-utils
alsa-tools i think
lol
which is it utils or tools
lol
utils
get both
ok
it was utils my bad
emerge -vp media-sound/alsa-tools media-sound/alsa-utils
if he doesnt have it, this is is a problem. who wants to bet its not the only one?
and set the right use flags
lol iamben
if someone doesn’t have this utils
ideas?
can’t set the default volumes
Im doing what u just said tr3
anyone know if there is a howto for setting up sound for gnome? I got it working everywhere else except for my gnome and gnome apps (like totem)
when you have set the use flags that you need just remove the -vp
and install
lol
sadly i have none… whats wierd is it dies just BEFORE it starts the merge portion
emerge alsa-utils
emerge alsa-tools
yes
lol
on the terminal
yup
doing it now
do you guys even know what alsa-tools is?
indeed
well, no but someone said to emerge them too
lol
damn kooldock looks a bit screwed up as well
a bird?
i suspect it is a limitation of portage… while you should be able to emerge to a different root, it still expects your system’s REAL root to be writable
lo all. Is recovering root still as simple as editing /etc/shadow to remove the pwd then resetting it? Sorry, not usually a Gentoo user
boot a livecd & chroot
I just discovered why
yeah but that way I have to have a gentoo livecd and know how to chroot
do tell
it wants to first upgrade my real packages and only then install to the other root
anyone using kooldock with a box?
and my real root is read only…
how do you expect to edit /etc/shadow without root access?
lol
from a live cd
lol
I have other livecds
i guess it wants all the deps to be in place on your real system before it can think about building the other, huh?
boot ANY livecd, mount your root partition, chroot in, and use passwd. takes 30 seconds once the livecd is booted
its weird though
ahh ok, guide I saw made it sound dependent on the specific gentoo cd, thanks iamben
hmm
do you happen to know where portage stores it’s list of installed packages?
now how do i check the sound?
I re-ran lilo and copied the file over
the kernel that is
/var/db/pkg
function snd_ctl_open failed for default: No such device
do i win the pot?
anyone knows what happened to packages.gentoo.org and gentoo-wiki.org ? both seems down
gentoo-wiki.com
gentoo-wiki.com is down all the time – use Google’s cache
Ill mount tmpfs over it too… lets see what happens
Can I get someone to help me with putting php module on apache2?
nm, bad idea
went to ##php and they said I’m denied?
yeah this whole thing could get kinda ugly
/msg nickserv help register
maybe try using -B (–buildpkgonly) so it doesnt actually try to merge to the live system?
how?
$PKGDIR should be on tmpfs or somewhere writable of course
what’s the procedure?
erm, send that command and it’ll tell you
oh ok!
but then how would I emerge the package?
trcan someone help me?
er can someone help me get my sound to work i enabled it in the kernel but it is not seeming to work
are you just trying to get your hands on e2fsck?
yes, but the latest one since the one I have crashes
hello
hi
how long does the install process take?
hi!
29 minutes.
what does ” /usr/bin/ld: cannot find -lmysqlclient ” means when compiling ?
i thought -B should let you build it without it trying to merge to / or writing anything in /var/db/pkg
did alsamixer work?
nope
in dmesg its sayn it dident load
?
i mean roughly
1 to 30 hours
what happens when you launch alsamixer?
yes, but it creates a special package for portage to use
its not that special, its a tar you can just extract to your “fake root” if you like
the linker cannot find a library to link
function snd_ctl_open failed for default: No such device
or the -lmysqlclient doesn’t exist lol
hmm
is the kernel ok?
i have to install a lib?
Im checking right now than going to try a reboot
first check if the -lmysqlclient is right
maybe it’s not the right name
all of my taskbar icons are not in my task bar, they are on my desktop like icons, and I cant get them back into the taskbar.. i tried logging out and back in, but that didnt fix the prob… and ideas?
how to check?
oh, cool
ehr, don’t know _
humm, ok, thx anyway
zless /proc/config.gz
and check if the module is on the running kernel
k
CONFIG_SND_AC97_CODEC
why we were discussing the -B option, I remounted /var/db/ as tmpfs
Nope. I dont think i ran lilo before i rebooted going to give it another whirl be right back
why? or while?
w/o the packages that were supposed to be reinstalled, so it should work hopefully
while
heh
while*
after many many years of everyone’s bad irc grammar, i’ve learned to read over typos without noticing
yame2
heh
didnt work trying B
“emerge -auvND world” isn’t detecting an update I made to a package in my local portage overlay… I’ve already tried an emerge –sync which didn’t solve it… any other ideas?
“what if i dwnload another arch eg 86x , normally i wont have the same bug aint it?”
still no go
dies at the same place?
because I have to get the dependencies merged into the system
–digest?
maybe I should just build it by hand?
or -r# it
i was going to suggest it, but if you really dont have the deps installed on / yet, that will be an issue
well, the deps are part of the tarball, so I would thing that if I do it by hand, they will be auto installed
oh ok
thanks, I had already created a digest/manifest for the ebuild… what is the -r# argument? I couldn’t see it on either the emerge/ebuild commands?
i was kinda wondering about all those deps, i think i build e2fsprogs for my embedded ARM a few months ago with few/no deps to have to worry about
power might go out :p…
change the version to package-version-r1
s/build/built since typos are still in my mind..
–digest should be enough, though
tr3 alsamixer loads now
my fault, it isn’t in my world file (doh!)
but not getting a cd to play or pidgin sounds to work
heh… well, it doesnt require many deps (2) but they are both part of the same tarball… I think it is only a gentoo split of them, since the docs dont mention them
well actually, I had another build in there instead
right
test
man I really need to get some ntp going.. my compy cant maintain the clock fer anything..
athlon:
hm hm
there’s a volume for the cd too
I have them all cranked
cranked?
nothn is coming out
turned all the way up
ok
probably
they are muted
there are 2 Ms?
MM
under the volume bars
?
ya
there not highlighted
ok
press m
MM = muted
OO = unmuted
I hit m on the keyboard it lights them up
after unmuting the volumes
exit alsamixer
ya there all 00
and use this command
alsactl store
ok did that
ok
now it should work
when i go to cd player it wont play the music cd i have in there
_
try to play an mp3
I dont have any on here
lol
this is where we need “your sound card works perfectly!” from the warcraft 2 installer
AubreyGurl, are u there ?
ugh this is fucked, I disabled EVERYTHING else besides that one thing in sound
could that be why
?
is it working now?
nope.
hm
lol
you disabled everything?
lol
think thats why?
yes
enable
at least
the masters
and
pcm
where those located in the kernel?
ironfoot, sorry my girlfrien is in “da house”
I disabled everything under Open Sound system
no ext4
disable oss
I see 2 errors in ur dhcpd.conf
it’s deprecated
ok
ironfoot, u there?
ah, you were talking about the kernel?
tr3 yes
hm
don’t remember which modules i have enabled
btw
disabled
and
ehr
Finally.
what?
Try less newlines.
lol
btw
what are you using to play the cd?
ksCD
hm, don’t know why it’s not working, try to find a mp3 somewhere on the net and try to play it
1
2
3
4
brb
lol
when using “make menuconfig” with the Linux source, is there a way to jump from a search result to the correct menu?
any apple mac experts here, who can pm me pls?
hrm. maybe try some other channels, to, /msg chanserv list #*mac* though that migh return a lot of results hehe
for ppc help with Gentoo, try #gentoo-ppc
yeah, freenode doesn’t like that …
sure they do
should work fine
tr3, i booted to windows in windows it says my sound card is a Realtek Ac’97
yes
we already know that it’s an AC97
and i copied an mp3 over to here
have a headache, need help …. do any of the install media support ndiswrapper or a recent version of ipw2200? I’ve got a killed chicken and egg issue
Does Knoppix support your card?
juk wont play the mp3 file..
some problems with camera… somebody can help ?
hm
can you paste your .config on a nopaste site?
the kernel config?
you’d think so … the version of knoppix I have (much like the 2005.1-r1 media I have with me) throw a wobbly when I try to load the ipw2200 driver … I think they’re having issues with the firmware or something … the general advice is to get a newer versions
yes
yes hold on
hey
http://rafb.net/p/PIUSAi84.html
trying to build wine-9999, but the error is the same as on .42
ok, 1 sec
I’m on amd_64, and for some reason the /usr/lib/gcc/ ……………. waitasec, I know what happens
similarly, I have windows drivers for the card, but knoppix 5 has “issues” with ndiswrapper …. so until I solve one or the other, I’m confined to basic XP pro or knoppix via gprs
dammit I have to rebuild gcc :/
AFAIK wireless support on Gentoo disks is minimal at best, you should try other live/rescue disks and hope that you find one that supports your card..
or boot into a working system and burn ndiswrapper to another CD
that’s what I did
Well you should tell Nazzy|Knoppix how you did it..
yeah, that’s why I was hopeful of getting knoppix working … I thought about grabbing the networkless install disks
I just kinda did ._. there wasn’t much to it
tr3 it wont let me msg u i dont have a registerd nick give me a sec
I miss plug and play lol
ok
how can i proced? http://rafb.net/p/jhMqk731.html
I also miss connections with speeds higher than ~14.4k modem and working on something other than a laptop … but those things I can survive a few days without
ironfoot, where art though… ?
*thou
alageasia, lol – y, my bad
i keep getting “No running windows found” errors when i run firefox
firefox is somtimes really titring:-)
crypticreign, do you need help getting around that, or are you just stating the fact?
sorry, yes, was wondering what was causuing it and how to stop the error
maybe killing its process …
crypticreign, well the problem is the proces is running and needs to be killed
You can start firefox in several ways, in one mode it tries to use existing running foxes to add a tab to
anyone else notice the new firefox is kinda sluggish or is that just me?
crypticreign, do you know how to kill a process?
I’m not sure if this resuse mode can be forced or you have a dead firefox in the background that needs a kill
this is even after a box reboot
first copy of firefox opened
yes
if I have a diff file and a file to patch, how would I patch it?
hello for all friends
anyone can help me with a error when compiling ?
teach nickmarinho ask
Just ask, don’t ask to ask, don’t ask who’s familiar. Don’t ask if anyone knows about it. Just ask the question, it’s the easiest way to get people to answer
Hello all how do I get to init 5
I need to kill x
Is it started with xdm/gdm/kdm? Then simply /etc/init.d/xdm stop will do
you change init level with init
I’m having problem when compiling app-mobilephone/moto4lin
ahh I need to rin Xorg -configure I have no file in its plase
run**
http://rafb.net/p/MTC2sr29.html
wise man says, you can lead an ostrish to water 
Miravlix, Im trying to change my screen res as well as add beryl features the file isnt there to change
I only have /etc/X11/xorg.conf” [New File]
I’m trying to use firefox-bin
/usr/libexec/mozilla-launcher: line 119: 13367 Segmentation fault $(type -P aoss) “$mozbin” “$@”
google was .. inconclusive
system is amd_64
Miravlix, so xdm stop will kill x?
so will ctrl+alt+bkspace
atleast restart X
I’m trying to compile app-mobilephone/moto4lin
http://rafb.net/p/MTC2sr29.html
Hey guys, I just emerged quake3-bin and when I try to run it I get this: “Sys_Error: Couldn’t load default.cfg” Any ideas?
google that one, you’ll see
Help me please!
Don’t think we can, looks like the ebuild is broken
Pilot, maybe because you emerged only bin
are you root?
crypticreign, what have you tried (rm -rf ~/.mozilla, add nsplugin & java web host to /etc/make.conf flags, etc…)
yes
i’m root
hmm
ebuild broken, how can ?
i havent tried anything yet, thanks for the suggestions
very odd, your getting denied
what else was I supposed to grab?
checking
another softwares install normally
crypticreign, 64 bit ?
Wont matter it’s a sandbox violation, you can’t get around that, need to get the maintainer to fix the ebuild is my guess
Pilot, maybe the whole game
i donnow
Well wouldnt the binaries be the game?
quake-bin, wont maybe contaign the configuration ??
nope, 32-bit
you didnt find the conf file right ?
nope
okie crazy idea … I have an ext3 partition … if I grab a copy of ndiswrapper latest, the approprate windows drivers, and shove them both on the drive … then boot in to 2005.1-r1 … and compile and modprobe ndiswrapper …
who can I fix this error ?
is it likely to work?
crypticreign, seg faults ?
pilot, your error is default.cfg
none
maybe its the default configuration ?
maybe reinstall the sandbox ?
I know. But I dont have that file at all.
check bugs.gentoo.org if it’s a known issue and add your comment to it or file a new bug report
this is a fresh install time, from yesterday
*install too
are there any other packages with the name quake3 ?
try to make a search
A tonne.
Most are just mods and stuff
crypticreign, no running windows found is all it says?
Although there is just a “quake3″ ebuild
pilot, tryx to emerge it then
yes
maybe it will contaign everything
checking
when i close firefox it says “Firefox exited with non-zero status”
does anyone know what %wa means in the top summary for cpus?
crypticreign, I assume revdep-rebuild does not help & emerge -eavDN world does not ask to install anything NEW
hi, all
http://packages.gentoo.org/ is down?
here I can open the mainpage, but not this packages search page,
/topic
crypticreign, does running firefox as root give you any additional info ?
hello all
HI !!
how do I add features (beryl setings and screen res)if there is no xorg.conf?
crypticreign, do you have strace? “strace firefox” & paste
hi, xorg fails to start, although its log doesnt contain any errors
i have posted a topuc with all the logs on http://forums.gentoo.org/viewtopic-t-574448.html
but i couldnt find a solution 
is there any hope to solve this ?
could this be a problem with fonts ?
NewCastle|lappy, Xorg -configure & xorgconfig can generate 1 for you
NewCastle|lappy, your choice
holytrousers, /var/log/messages
please i will have to reboot cos im not under genroo
thanx for your patience
dmesg will be okay ?
Hi
I_R_Baboon, Xorg -configure makes one that wont work so you are sying to try the other way you typed then?
sure… (you can fine tune later)
thanks
two questions … 1/ what’s on the gentoo livecd 2/ what’s on the gentoo live dvd?
Aah, we had a little accident, so the live DVD contains my collection of pink bunnies.
living stuff
they’re both media you can boot a computer from to install Gentoo, fix some minor problems, do some minor testing, etc (you can use it with no hard disks in your system)
neat! I love bunnies
okie … perhaps wrong question … are we talking X environment, webbrowser, make, gcc, ndiswrapper… what extent of tools are on it heh
http://distrowatch.com/table.php?distribution=gentoo
okay, this is insane
I have an irreproducable error in an ebuild
(wine-9999)
http://forums.gentoo.org/viewtopic-t-573550-highlight-.html
if I take the command that produces the error
plz help
go into the folder, and run it
(x86_64-pc-linux-gnu-gcc -c -I. -I. -I../include -I../include -D__WINESRC__ -Wall -pipe -fno-strict-aliasing -Wdeclaration-after-statement -Wwrite-strings -Wpointer-arith -march=nocona -O2 -pipe -o request.o request.c)
it builds, smoothly
but if I use emerge, it fials.
*fails.
wine-9999 = latest SVN build? which explains why it’ll be very buggy
yes, but the error is the same as in .42
what is the specific compilation error?
request.c:148: warning: incompatible implicit declaration of built-in function ‘fprintf’
I think it’s because some headers are broken
nope, it’ll be an “error” not a “warning”
hello
yes, I use gentoo as my primary os … but I can’t see an answer to my question on that page :/
right, sorry
wrong line
well i am back
and the dmesg
request.c:148: error: ’stderr’ undeclared (first use in this function)
look under the 2007.0 column for a list of software versions included on the latest LiveCD/LiveDVD
How do i emerge a program on an AMD64 system as a x86?
anyway, at this point I’m pretty much sick of it
installing wine manually
Or use www.gentoo-portage.com to see which versions of software are available for installation on a fully updated Gentoo installation
well should i paste some lines in the froum page ?
anyone know what is going on?
that is a problem in the source code of wine I imagine?
it’s not
it’s something on my box
some header conflict
I’m making manually now
f** this error
hey, sorry for this stupid quesiton, but what’s a reasonably safe way of adding eth0 and eth1 to /dev ? thanks.
there isn’t any such thing as a /dev entry for the network interfaces, i wish..
my dmesg contents are on http://forums.gentoo.org/viewtopic-p-4181175.html#4181175
do you have a copy of the request.c from the temporary portage build directory?
fieldy, create a pipe to a script that calls netcat? hah
ahhh. that helps. so, assuming ifconfig shows nothing and init.d/eth0 says there’s no such device, what would you reccomend?
virdiq, did you read what I said? if I build that manually, it works.
the very file.
kf
*pokes stupid keyboard*
I think I bleeped up my build env.
livecd 2007.0 has kde 3.5 loaded on it?
so you are using git://source.winehq.org/git/wine.git as the source code in each example?
I am using the file wine cancelled on
er
emerge
so, yes, that’s probably it
but the same error happens on stock .42
I keep being told eth0 doesn’t exist, but the driver is there and in modules.conf…
hi, i have “digest verification failed” error for one ebuild, what to do with it normally?
?algum brasileiro na sala?
can i just remove *.ebuild?
if it’s not shown in ifconfig -a then it really doesn’t exist, meaning 1) the module isn’t loaded 2) the support isn’t compiled into the kernel at all 3) something is broken hardwarewise
teach GuidOxD .br
No such faq
teach GuidOxD br
No such faq, did you mean one of ‘bon echo mozbranding’, ‘brazilian brasilian’, ‘broken’?
aqui BR
teach GuidOxD ‘brazilian
No such faq
CRAP
anyone look at this? http://forums.gentoo.org/viewtopic-t-573550-highlight-.html
teach GuidOxD brazilian
brazilian brasilian: You probably want to ask me about Portuguese.
xD
b=ok i give up
Anyone run (open source) POS software for small businesses?
#gentoo-br
Thanks. it turns out i have an eth1 and an eth2 but not an eth0 :p
You can’t run KDE from the LiveCD, but you can install it from the CD (v3.5.5 – see http://www.gentoo.org/proj/en/releng/release/2007.0/2007.0-press-release.txt)
that’s quite strange, i would suggest a dmesg | grep eth0 and see what pops up if anything
#gentoo-br
xD
brasilian language doesn’t exist
Alguem joga tibia ai?
faq Portuguese
Se precisares de ajuda em Portugu?s podes tentar no canal #gentoo-pt ou #gentoo-br.
Play tibia?
I get this:
root@(none) init.d # dmesg | grep eth0
eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
root@(none) init.d # dmesg | grep eth1
eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
oops
Play tibia?
bob
did you get that Fieldy?
bob
BR?
teach GuidOxD Portuguese
Se precisares de ajuda em Portugu?s podes tentar no canal #gentoo-pt ou #gentoo-br.
any fancy/unsupported compiler settings like -O3/etc?
nopes
virdiq, I presume this will work
and it’s a problem that’s isolated to my box
does anybody remember where in the kernel config one finds DRI?
so don’t worry
in make menuconfig, you can push “/” to search
cool
yeah but it makes no sense to me at all if the kernel set up eth0, but ifconfig -a doesn’t show it
that’s what I was after … I’m interested in what apps are actually in the environment, since I’m lacking a net connection until ndiswrapper or ipw2200 is working
downs, ty
no prob blue
xD
Me neither. This is just a genkernel i’m trying to use to get a proper custom kernel configured right on an embedded box, so hopefully it’ll go away
Does anybody play tibia here?
genkernel has issues on the desktop. There is no way that I would trust it to even spell embedded.
teach GuidOxD topic
The main topic of #gentoo is _support_ for Gentoo Linux. If your question isn’t Gentoo-related, or if it’s Gentoo-related, but not support-related, ops may ask you to move the conversation to #gentoo-chat or another more appropriate channel.
yeah, i don’t trust it. that’s why i’m buiding a custom, but gotta get into the box first…
0am and I’ve been fighting with this network card for several hours
I have a problem with excessively large log files.
why dont you go sleep, you’ll be concentrated tomorrow morning
logrotate
Or rather, I login and watch my free space dissapear because /var/log/messages gets flooded with error messages. I tried to set permissions to read only, but I’m not sure that’ll work
you can install Gentoo “offline” as well, until you have the network setup (you just need to make sure you burn the packages needed for wireless networking to another CD beforehand)
your mind is surely foggy, it makes it hard to concentrate
Because I’m afraid to try anything else, is there anyway I can get whatever’s writing to /var/log/messages to shup ;|?
And also, to find large files?
kill your log daemon. Mine is sysklogd
Okay.
gcc-config -l (how many results show up?)
I was trying to get the initial work running while I slept heh
that may yet be my solution :/
What about finding large files? I use spacemonger in windows, and if I could get X running, I’d do the same. But I don’t think “find” has any size parameters.
No wait, nevermind, it does. sorry ;X
I always find it easier to just move the computer next to a router/switch and plug it in via a short cat6 jumper
just one, but I screwed around with a manual gcc install
find has every kind of switch you can imagine.
Samatros, find the source of the errors
find / -name ’stdio.h’
is there a way to see if a program is supported in a particular layman overlay without adding them all?
also /etc/init.d/syslog-ng stop
maybe you need to reinstall glibc to fix/update your standard C libraries?
virdiq, that might .. take a sec
running firefox as root shows the same No running windows found error, but nothing else
it’s okay, wine seems to be the only package that breaks that way
anyone? lol
that would normally be the solution, but I’m not at home (hence most of my headaches from doing this heh)
http://source.winehq.org/source/server/request.c#L148
and?
* include/msvcrt/stdio.h, line 125
.. er
.._.
oi
alguem online?
I don’t think that’s what they mean.
fprintf is standard C.
the msvcrt headers are not included there, right?
virdiq, you don’t need to spend your time on this.
I mean, it’s appreciated but also unneccesary.
+s
I’m just curious why the problem would occur (but it seems to be Wine specific, not something related directly to your glibc build) ?
mmhm
how do i to get recursive directory “wget -r *.bz2 files!”?
try adding “#include ../include/msvcrt/stdio.h” into server/request.c
the msvcrt include doesn’t belong in there!
the msvcrt include is part of the MS Visual C runtime!
(or rather, wine’s version of it)
request.c is unix code, not windows code!
request.c is hosting on unix based servers code, not windows code!
oh, in related news
making wine manually worked
installing now
has anyone been able to successfully build =qt-4.3.0 ?
What is the best way for me to identify what modules are being loaded by my system and therefore should be included in a kernel? I’m not sure I understand the lsmod output well enough.
after i emerge a font package, what do i have to do to be able to use it?
What in the heck could be wrong with my config that I get 2000 header errors on make menuconfig?
I’m not too sure then… are you manually building out of /var/tmp/portage/… ?
yea :p
xt4100 wine # wine –version
wine-0.9.42
WHEEEEE
its been a while since ive been on my linux box, do to my move, and im wondering, hows the support on pci based wireless n cards?
are you just building it with “make”?
yep
mees, works here
crypticreign, strace firefox
what can I say
good to hear, im looking to by a linksys nic for my wireless since im switching from ethernet to wireless, but im going to redo my system completely, so all should be good
second question, anyone have any complaints with compiz fusion?
meese, to make that clear, YMMV.
please post example of errors at pastebin.ca, post the URL here
I do not have any knowledge about the state of wireless on linux.
I was just offering a single data point.
curl is such a retarded version of wget
ymmv?
jfgi
j/k
your mileage may vary
i wasnt really asking the state, more along the likes if anyone has any issues
lol, k
bbl
*always* check to see how well a wireless chipset is supported in Linux (http://linux-wless.passys.nl/)
before you go out and buy a card… also do a google search on your proposed card and whether any forum posts state that people have got it working
ok
curl is a library used in software, so a curl stand alone implementation is not reallyt he point of it
compiz-fusion is beta quality, complaints would be… lack of a proper compiz-fusion release from the developers
Miravlix, yea i know but osx doesn’t have wget out of the box
it has curl
they are making an official compiz-fusion release soon
What is the current state of sli on linux?
yeah, i read about that, the logo looks decent
my question was because i had issues with borders in beryl, they would always blank out, and i hated that, it only happened with the latest update to beryl i had then
goddammit something broke my dammed gcc when i moved htis image from the machine i built it on onto this box
I don’t so much have a support question, but … What available emerge package would be best for batch converting2137 WAV files into MP3 files? Anyone?
I’m using HDA Intel in a Realtek ALC861 chip, but even with everything configured using alsaconf, I can’t play any sound!
Dominicus, a sh script ..
i have the same chip i think
matt271, and everything workign?
i had to enable something else on the kernel config before it worked
i forget exacly what it was i can try and find it for u
matt271, don’t you remember?
matt271, would be really nice if you can
run alsamixer and unmute the audio channels and turn the volume up, then try again. But, there’s also a command available some palce that lets you pipe random data to your audio devvice to test it’s ability to let you hear the audio.
Dominicus, Thats sounds scary hehe
i was about to go get high and watch that new adam standler movie, but what the hell im a nice guy
hey Ive installed gentoo 2007.0 and I’m trying to make a router.. I wasnt able to emerge dhcpcd because I dont have an internet connection so I downloaded it on my other computer and installed it via a usb stick.. ie i built dhcpcd myself.. now when i try and configure eth0 with dhcpcd it
says theres no dhcpcd client
A bash script. Um.. okay. But what utility will do the WAV to MP3 conversion.
Dominicus, http://gentoo-portage.com/Search?search=mp3+encoder
ok, i must be blind.. is there documentation for adding an ebuild to my box that is using layman overlays? (this particular ebuild isnt in any overlays)
Dominicus, it’s “unmuted” and the volume is on the max… I tryed using banshee player and the gnome sound configuration
let see… i had to modulize something and emerge something….. is there any easy way i can just send u my kernel config?
can anybody tell me why some very popular webapps (wordpress, phpbb, …) are masked in portage? i guess due to security reasons, but then again, this is some strange concept, having the packages in the repository, but making them inaccessible
what comp do u have? is it hp m7350n?
does this mean gentoo is not recommended as a webserver?
I did it when setting up my HDA Intel Conexant audio. But, ensuring that the audio drivers were working was paramount, before trying to get KDE to channel audio application output to the appropriate sound system.
For non-enterprise, I would say ’sure’
Dominicus, setting up sound can be fun
it is either because they haven’t been tested, they have security faults which are unfixed, any number of reasons
matt271, yes, there is….just send me the .config file that is into the linux hosting src folder
kk hold on
So can pulling teeth with pliers.
Dominicus, indeed
anyone? layman? custom overlay?
what do you mean?
www.rapidrip.ca/blah
ShockValue, gentoo-wiki has a doc on that and portage, I think,
I would use it for non critical systems personally
if they haven’t been tested, they should be in testing
does anyone know how to fix my problem?
ie how do i get my machine to realise that ive installed dhcpcd
Gentoo is perfectly OK to use a web server except that patches are not backported to older versions of software (as is the case with other stale distros)
u get that link?
i see. then what to do if a company wants to use, let’s say the most popular blogging software…
are you talking about hard masks or the ~ mask?
hard masks
they are all hard masked
if i were you, not matter what distro, I would install wordpress, etc by hand
for months it’s been like that
matt271, yeah! now I got! I just don’t know from where begin…..
i know its more of a hardware question, but what do you guys think for next upgrade, go for the native quad amds or wait for penryn on intels side?
what would be the point of that exercise? making sure that you’re not getting updates through your package manager?
meeseontheleese, imo, all ways go amd, 
… going to lunch
meeseontheleese, If your only option is x86 arch….
It’s personal perference, I can easily stay on top of new releases that way, I know worpdress realeases a lot
*releases
how do i set the default dhcp client for a machine?
then again i run rhel on 40 enterprise web servers
for gentoo
*
crypticreign, have you rm -rf /home/paul/.mozilla/firefox/
i followed a guide off something but i cant rem what
smoked too much weed sorry
matt271, no problem
i think it called itself a “matrix”
matt271, but I think I found
if u cant get it ill prob be in here tomorow and i can look it up mor eofr u
but im going now cya
hello?
it is probably because those web scripts are not supported by Gentoo
something up with packages.gentoo.org?
haven’t been able to access it for about 24 hours
crypticreign, if it still does nor work emerge mozilla-firefox again
*not
anyone know what chipset linksys uses?
meeseontheleese, many
meeseontheleese, depending on chipset
shite
any idea what site might give me an idea?
meeseontheleese, i meant chipset & vs.
google linksys your_model chipset
meeseontheleese, i meant model & vs.
too stoned
I will try the two items you suggesteed in order, thanks
lol, that snice to know
see http://forums.gentoo.org/viewtopic-t-545662-highlight-wordpress.html (a developer seems to indicate it is because of constant security issues)
well that had some info.. but i didnt see antying on how to add my own local portage overlay
welp, rm -rf .mozilla/firefox didnt fix it
guess Ill try the re-emerge
ShockValue, I have not tried it yet my self, Just rem seeing a doc on it there, or I would of gave ya a direct link Any one else ?
actually i might have figured it out with a bit of tinkering.. let you know in a minute
okay guys, im not having enough luck, http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1144763512962&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1296223093B04
what im going for
What is the hal use flag good for?
n3kl been a while, but hotpluging usb
been a while what?
is it still prominant?
n3kl since ive been in my linux box, moved july 6th, still havent seen it
euse -i hal … [+ C ] hal – Enable Hardware Abstraction Layer (HAL) support
any news about packages.gentoo.org?
offline until further notice
bandwith_ is that so bad?
i’ve seen that questioned asked about 40 times today
it’d be nice for an official notice on GWN or gentoo.org
yes, it is the current standard… see http://en.wikipedia.org/wiki/HAL_%28software%29
bandwith_ Yes you are right
can you use www.gentoo-portage.com for now?
emerexit
oops
crypticreign, if after emerge still does not work paste “cat /var/log/messages | grep firefox”
How do I create md devices in /dev?
ok
anyone know if there is a pack of snippets for gedit out there?
line 2232 of inet Errors from xkbcomp are not fata
l to the X server
anyone run bibble pro on their machine? i cant seem to get it to run.. says its missing libraries so i run rev-dep rebuild, which re-installs the program, but no libraries.
error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory
oh, dear
I set my root password to something from /dev/random
and now I think I need it to add a printer to CUPS
it’s asking for authentication
is that right?
yeah
cups wants root passwd/user
ShockValue, emerge -av1 libstdc++
but I’s a sudoer x.x
if you forgot your root password just boot to the livecd, mount filesystems, chroot and reset the password
bif you forgot your root password just boot to the livecd, mount filesystems, chroot and reset the password/b
blair or do some reading on cups to see how to setup special cups user n stuff
eh, can’t I just sudo passwd root?
ok
blair of course
sudo access should be blocked by default
but cups needs root passwd
some other distros i’ll leave nameless leave this neat little security hole wide open lol
dammit, what do i do to create my vg nodes…
my /dev is so screwed up…
shit
yeah I just have it so that only wheel users can sudo, and I kept the rest of my family out of wheel
bob__ unpack it from the stage3 tarball again?
vgcreate/lvcreate
having fun with lvm?
whats up all
see http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml
line 2232 of inet Errors from xkbcomp are not fata
just updating servers here
unfortunately, the vg’s and lv’s already exist. i’m taking a NAS with nice hardware and replacing the kernel and distro on it.
oliv3r, usb keyboard?
Thank you!
Hello all, When i am emerging Syslog it is giving an error like “gcc-config error: Could not run/locate “i486-pc-linux-gnu-gcc”". Please help me out…
ali3nx, ps2
Hello, i’m having the worst of luck with xorg-x11. After a blistering 6 hours of downloading and installing the packages, my xorg installation has finished. I didn’t do anything, and it wouldn’t run. So I decided to completely follow through with the instructions on installing the nvidia
proprietary drivers, which likewise didn’t work
oliv3r, did you create your xorg.conf with Xorg -configure
‘didn’t work’ isn’t good enough
genixpro “it doesn’t work” is the mark of a windows user
anilomkar, did you check your gcc-config
if they already exist… don’t create new ones!
ali3nx, i just copied the .example, cause ati drivers need a file :/
was there an error message? at what point did you conclude that it doesn’t work?
ali3nx, lemme try that though
how is it deviating from the expected behaviour?
modprobe nvidia
Error inserting nvidia (/lib/modules/2.6.21-gentoo-r4/video/nvidia.ko): Unknown symbol in module or unknown paramter (see dmesg)
hi ppls. I have folloed Photoshop#gimpshop tutorial on gentoo-wiki, but when i trye to emerge it after following steps, i get error from portage stating its no ebuilds satisfying “gimpshop”. What should i do, thanks for your time.
oliv3r, the probed config will work in most cases but now that you mention it ati is the execption
vgscan, then vgs and lvs to list volumes
please bare with my i had to copy that from another computer
oliv3r, yes my gcc-config pointing to “i686-pc-linux-gnu-4.2.0″
ali3nx, well it works without the ati driver, but i need the ati driver cause i only got a tv as monitor, so i need the xorg.conf for aticonfig
anilomkar, did you change your CHOST variable in make.conf at any time after install?
*nod* oksorry
unknown symbol i2c_del_adapter”
oliv3r, pastebin the section of keyboard in you xorg.conf
if I install alsa built-in the kernel, should I use the alsa-plugins or not?
which nvidia driver version?
ali3nx, no i didn’t changed it
also what vidoe card do you have?
video*
u shouldnt need to
lilminime,
chjunior, not required with built in alsa… just use modules for alsa if you go with in kernel style and then setup alsa-utils
I’m presuming the latest available when I do emerge nvidia-drivers but i’ll get the exact version
are you using a stock gentoo-linux kernel?
I have an XFX chipset with a Geforce 6600 LE
have any of you installed pidgin? i installed it with no errors but it doesn’t look like it installed an executable gui
bleh I need a remote restart button…seems my system downstairs crashed but I don’t really wanna carry a monitor down there and hook it up
only a console version
ali3nx, to use jack for example… I need alsa-plugins, right?
ali3nx, ok the probing gives me a sig11, i’ll try unloading the fglrx module and such so that it can run/detect with the radeon driver, which seems to work, as i can ctrl-alt-backspace out of the garbled boot
it sounds like your kernel doesn’t have i2c support compiled in (or maybe you need to the load the module for it)?
i used gtk, tcl and tk use flags… so wtf?
yes, the one for amd64 with the patches and such
using the latest ~amd64 Pidgin with no problems
chjunior, i havent used jack in ages… uncertain
where in the kernels menu_config is i2c support?
i am on amd64 but unmasked the latest pidgin i think
oliv3r, probeonly doesn’t work with ati-drivers… ati stupidity
that web page was helpful, but my problem is this: the VGs and LVs already exist, and show up in vgs/lvs. the problem is, there are no nodes in /dev
